What To Tell Your Hydraulic Supplier
When looking for a new piece of hydraulic equipment, what should you tell your hydraulic supplier?
If you’re unsure exactly what you are looking for, It is important you let your hydraulic supplier know a few vital pieces of information, including where the machines are going to be used.
Hire or Purchase
Are you looking to hire or purchase your equipment?
If you are in an environment with high dust levels, you may need to look at ways to control the airborne dust, such as using contamination exclusion and control.
Let your supplier know the minimum and maximum temperatures where you will be working. Cooling or heating components may be required in extreme temperature conditions.
To ensure the perfect level of lubrication, it is important to select an oil that is meant for the operating temperatures of the system.
With extreme humidity in a working environment, you may require to use a moisture absorbing tank breather.
If you are working in a location that is hazardous.
If you’re still unsure on any of these, TJI Solutions is your one stop shop for all your requirements covering all industries and applications. Please get in touch today and we will be happy to answer any of your questions.
SPX Bolting® PE8 High Pressure Electric Pump
The SPX Flow PE8 is a very high pressure pump that incorporates proven design for reliable operation. It is based on proven pump design for reliability in rugged bolt tensioning applications.
21,750 PSI (1,500 BAR) HIGH PRESSURE ELECTRIC PUMP
The SPX Flow PE8 is a very high pressure Electric Tensioner Pump that incorporates proven design for reliable operation. It is based on proven pump design for reliability in rugged bolt tensioning applications.
Quality means Lower Life-Cycle Costs:
- Over 100,000 cycles
- Continuous duty up to 122˚F (50˚C) ambient
- Proven design = Proven reliability
- Light Weight and portable: 45.5 lb (20.6 kg) [without oil]
- Quick Release, removable control pendant (15 ft / 5 m)
- Removable 4″ (100 mm), calibration-capable, gauge
- Universal Motor for reduced voltage applications (up to -20% nominal voltage)
- SPX Tensioners are designed to daisy-chain together so multiple tools can run off one pump
- Compact design fits into tight spaces
Designed with Safety in Mind:
- Easily adjusted pressure regulator (relief) valve
Maximum Oil Capacity: (vented reservoir)
1.0 Gallons (3.8 L ) [to fill line]
0.9 Gallons (3.4 L) [usable]
-13°F to +122°F
(-25°C to +50°C)
(When operating near temperature extremes, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)
87-92 dBA (maximum)
0 – 21,750 psi
(0 – 1,500 bar)
168 cu. in/min – 8 cu. in/min
(2.7 L/min – 0.13 L/min)
0.5 hp Universal Motor
110/115V – 50/60 Hz (11 amps)
220/230V – 50/60 Hz (5.5 amps)
TJI Solutions – Torquing Your Language!!
Scotland: 01224 063 680
England & Wales: 0191 917 0576