Powerteam – Shop Presses: H Frame Open Throat 25 Ton

Shop Presses: H Frame Open Throat 25 Ton

Product Type: H FRAME
Design permits use as both H frame and C frame press.

POWER TEAM® Shop Presses: H Frame Open Throat 25 Ton

OPEN THROAT® PRESSES

    • Cylinder can be mounted on frame extension to handle jobs which won’t fit between uprights.
    • Open Throat® press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
    • Off-center pressing loads of full capacity can be applied across entire width of frame.
    • Press bed height easily adjustable with winch. Bed will not drop when handle is released.
    • Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.

View our other Power Team Products

View the SPX Power Team Resources  

Specifications (Imperial)

OPEN THROAT® Presses:

Order
Number
Capacity
(tons)
Type of
Cylinder Used
Stroke
(in.)
Cylinder
Model
Speed (in./min.)†††Type
Pump
Valve
Type
Pump
Model †
Weight
(lbs.)
AdvancePressing
SPA251425Single-Acting14 1/4C2514C9.81.2Air2-Way FootPA6683
SPM251425Single-Acting14 1/4C2514C0.49 in./stroke0.03 in./strokeHandLoad-ReleaseP159693
SPE251425Single-Acting14 1/4C2514C46.63.3Electric2-Way††PE172665
SPE2514S25Single-Acting14 1/4C2514C524Electric3-Way†PE213S759
SPE2514DS25Double-Acting14 1/4RD2514524Electric4-Way†PE214S787
 † Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 10′ remote motor control.
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172–67/81 dBA; PE21–70 dBA measured  at 3 foot distance, all sides.

PUMP ELECTRICAL SPECIFICATIONS

PE17 Series
 – 1/2 hp, 115 volt, 60 cycle, single phase.

PE21 Series
 – 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix “-220” to order no.

Specifications (Metric)

OPEN THROAT® Presses:

Order
Number
Capacity
(tons)
Type of
Cylinder Used
Stroke
(mm)
Cylinder
Model
Speed (mm./min.)†††Type
Pump
Valve
Type
Pump
Model †
Weight
(kg)
AdvancePressing
SPA251425Single-Acting362C2514C24930Air2-Way FootPA6309
SPM251425Single-Acting362C2514C12,4 mm/stroke0,8 mm/strokeHandLoad-ReleaseP159314
SPE251425Single-Acting362C2514C1.18484Electric2-Way††PE172-E220301
SPE2514S25Single-Acting362C2514C1.321102Electric3-Way†PE172S-E220344
SPE2514DS25Double-Acting362RD25141.321102Electric4-Way†PE174-E220357
 † Solenoid valve with 12 volt remote control hand switch.
†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 3,1 meter remote motor control.
††† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bari: PE172–67/81 dBA; PE21–70 dBA measured  at 0,9 meter distance, all sides.

PUMP ELECTRICAL SPECIFICATIONS

PE17 Series
 – 1/2 hp, 115 volt, 60 cycle, single phase.

PE21 Series
 – 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix “-220” to order no.

Dimensions (Imperial)

671x386_SPA2514 LA

A
(in.)
B
(in.)
C
(in.)
D *
(in.)
E
(in.)
F
(in.)
G
(in.)
6843283-296 7/8-43 3/84 1/232
H
(in.)
J
(in.)
K
(in.)
L
(in.)
M
(in.)
Floor
Space
(in.)
5 1/26 1/272 1/2843 x 28
 *Lateral head movement

Dimensions (Metric)

671x386_SPA2514 LA

A
(mm)
B
(mm)
C
(mm)
D *
(mm)
E
(mm)
F
(mm)
G
(mm)
1.7271.09271176 – 737175 – 1.102114813
H
(mm)
J
(mm)
K
(mm)
L
(mm)
M
(mm)
Floor Space
(mm)
140165178642031.092 x 711
 *Lateral head movement

Accessories

Go to Accessories section for product detail:

Shop Press Accessories:

Downloads

Catalog
Operating Instructions
Parts List
Scroll to Top