EvoTorque 2 ET2-119

Norbar EvoTorque® EvoTorque 2 ET2-92
Available with Pelicase and Right Angle Gearbox 
Call for More Information

  • Operating range from 600 N•m – 7000 N•m
  • Versions for 110V a.c. or 230V a.c.
  • Factory calibrated to ± 3%
  • USB and Bluetooth® 4.0 data transfer (also called Bluetooth® Smart)

The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and, when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia.

Consequently, EvoTorque® can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate). All EvoTorque® tools are highly tolerant of supply voltage and frequency variation. When the tool runs, it will run accurately. If the supply voltage is outside of tolerance then, as a safety feature, the tool will be prevented from starting.

Categories: , ,

Norbar® EvoTorque 2 ET2-119

    • Operating range from 600 N•m – 7000 N•m
    • Versions for 110V a.c. or 230V a.c.
    • Factory calibrated to ± 3%
    • USB and Bluetooth® 4.0 data transfer (also called Bluetooth® Smart)
    • 3000 reading memory, time and date stamped
    • Complimentary PC software ‘EvoLog’ for data management and tool configuration
    • Very low vibration levels using a non-impacting mechanism; this leads to comfortable and safe use with less damage to the tool, socket and threaded assembly
    • Reaction forces are contained by the reaction bar, so forces are not passed back to the operator
    • Several reaction bar styles available, including versions for restricted applications. Engineered to Order reaction accessories are also available, see examples.
    • Correct torque output from hard through to soft joints
    • Indicator on the tool clearly signals that the correct Torque or Angle has been achieved
    • Product Videos

    Technical Data – EvoTorque2 / Technical Data – EvoTorque2 with Right Angle Gearbox

View our other Norbar Products
View our other Power Team Products
Other SPX Power Team Resources  

Features

  • ‘Usage’ counter gives the ability to see the amount of times the tool has been used since the last reset
  • “Operation Direction” designed primarily for undoing bolts. When doing sequence tightening, it is now possible to undo an incorrectly tightened bolt without interrupting the sequence
  • 2 Stage Tightening gives faster application of a Snug Torque & Angle Target
  • “Turn Angle” option can be used to check if bolts have already been tightened in an assembly process
  • Allows tool integration into third party control systems
  • Maximum Audit Mode target angle increased to 720 degrees
  • Ability to produce and store real time graphs via EvoLog
  • 2 different lock levels, lock level 1 as per previous lock, lock level 2 will not allow user to exit the run screen or change the target
  • Torque, Torque & Angle, Torque & Angle with Final Torque or Torque Audit Modes
  • Each tool is supplied with a traceable calibration certificate
  • For more features please see link to sales leaflet under catalogue below

Download

OPERATORS HANDBOOK

CATALOGUE

Scroll to Top