Hydraulic Press Maintenance

Follow Us

Hydraulic Press Maintenance

By making sure you inspect your hydraulic press often, you are reducing the risk of complete system failure.

 

You should check the below regularly:

  • Check for any oil leakage
  • Check for any problems with the hoses
  • Check for any issues with the cylinder
  • Check all parts are lubricated properly
  • Check the oil level
  • Check for overheating
  • Check all fasteners, bolts, adaptors, etc

How To Prevent Issues with Your Hydraulic Press

 

  • Don’t over stroke the press
  • Use compatible hydraulic oil
  • Use new and clean oil
  • Protect the system from dirt and dust
  • Place all seals and fittings properly

If you have any further questions about hydraulic presses, Contact us for any technical information or any other enquiries.

 

 

Featured Item:

POWER TEAM® Shop Presses: H Frame Economy 25 Ton

ECONOMY PRESSES

How To Maintain Your Hydraulic Press

  • Stroke length limited to 6 1/4″ (159 mm) on economy models.
  • Press bed height easily adjustable with winch. Bed will not drop when handle is released.
  • Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.

“ECONOMY” PRESSES:

Order
Number
Capacity
(tons)
Type of
Cylinder Used
Stroke
(in.)
Cylinder
Model
Speed (in./min.)† † †
AdvancePressing
SPA25625Single-Acting6 1/4C256C9.81.2
SPM25625Single-Acting6 1/4C256C0.129
in./stroke
0.129
in./stroke
SPE25625Single-Acting6 1/4C256C46.63.3
Order
Number
Type
Pump
Valve
Pump
Pump
Model †
Weight
(lbs.)
SPA256Air2-Way FootPA6578
SPM256HandLoad-ReleaseP59595
SPE256Electric2-Way††PE172607
 † Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 10′ remote motor control.
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172–67/81 dBA; PE21–70 dBA measured at 3 foot distance, all sides.

PUMP ELECTRICAL SPECIFICATIONS

PE17 Series
 – 1/2 hp, 115 volt, 60 cycle, single phase.

PE21 Series
 – 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix “-220” to order no.

 

TJI Solutions supply national coverage on a vast range of Controlled Bolting & Flange working equipment for Hire & Sale We also offer servicing and calibration for all your torque tooling. Making us a one-stop shop for all your torquing and bolting needs.

Our engineers are available to help with any technical requirements 24/7 365.

 

TJI Solutions – Torquing Your Language!!

Scotland: 01224 063 680

Sue.gallacher@TJISolutions.com

England & Wales: 0191 917 0576

michael.collins@TJISolutions.com

LinkedInwww.linkedin.com/company/tji-solutions/

Related Posts

Hydraulic Press Maintenance

Hydraulic Press Maintenance

Share:

Facebook
Twitter
Pinterest
LinkedIn

Follow Us

Most Popular

Related Posts